V-6 & V-8 Pumps

v6 rh side


Available in 6, 8, 10, or 13 foot lengths
Either 540 or 1000 RPM
6″ x 5/16″ unload pipe with bi-direction load or agitate valve
Two point mount hydraulic tilts into pit openings as small as 30″ x 48″
7″x7″x1/4″ Main Beam
Main Drive line
Heavy duty 200 Hp gear box, 1:1.35 ratio
3″ OD hollow drive line with upper and lower greasable yokes
stainless impeller shaft
Triple seal oil bath bearing assembly with 1-3/4″ stainless steel lower shaft.
Oil Level glass
20″ diameter, 4″ depth, impeller with 6-1/2″ long, thick, curved Blades
replaceable triple cutters on impeller opening
Large intake throat
AR Steel impeller housing
Stainless Steel Agitation gun
Hydraulic controls-nozzle rotate, raise-lower, and agitate-load (Requires 3 hydraulic outlets)
Optional hydraulic control valve (Requires hydraulic outlets)
Hitch type: 2 point category II or III


Trailer Mounted
3 pt. Quick-Tach Hook-up
Hydraulic Controls Kit
controls load agitate valve
Controls agitation nozzle horizontally and vertically
Requires 3 hydraulic outlets
Hydraulic control valve
Electric powered models
Gear Box cooling system (only available on 1000 rpm pumps)

Pump Specifications




(Gallons per minute)
4000 5000
Minimum hp requirements: 110 hp 140 hp
Unload Pipe: 6″ x 5/16″ 8″ x 5/16″
Pump Impeller Size: 20″ diameter
x 4″ depth
AR steel
22″ diameter
x 4″ depth
AR steel
Click on a picture to see full size and be able to scroll through all pictures below.
Back to top